王志勇，谌志新，江 涛
（农业部渔业装备与工程重点开放实验室，十大网投正规信誉官网，上海 200092）

摘要：为了满足池塘养殖产业化、现代化的需要，提高养殖机械自动化水平，基于气力输送原理，设计了一套以可编程序控制器（PLC）为控制器的集中式自动投饵系统。介绍了投饵系统的组成及工作原理，分析了系统气力输送、多路配送、自动控制等关键技术。根据设计要求，对自动投饵系统进行投饵性能测试，投送距离320 m时，最大投饵量为1 100 kg/h，吨料能耗低于8 kWh/t，饲料破碎率低于0.7%。试验和实际应用结果表明，该系统能够实现定时、定量以及高效投喂，操作方便，可靠性高。

关键词：池塘养殖；投饵机；气力输送；自动控制

Centralized automatic feeding system in pond aquaculture

WANG Zhi-yong, CHEN Zhi-xin, JIANG Tao

( Key Laboratory of Fishery Equipment and Engineering, Ministry of Agriculture, Fishery Machinery and Instrument Research Institute, Chinese Academy of Fishery Sciencse, Shanghai 200092, China )

Abstract: In order to meet the industrialization and modernization of pond aquaculture, and improve the mechanical automation of cultivation, a set of automatic feeding system was designed based on the principles of pneumatic conveying, which takes programmable logic controller as controller. This paper mainly introduced the composition and working principle of feeding equipment system, the key technologies such as pneumatic conveying, multi-channel distribution, automation control been analysed as well. According to the design requirements, 320 m length of transporting tubes were for performance test, with the biggest suitable amount 1 100 kg/h, the tons of material consumption below 8 kWh/t and the feed broken rate lower than 0.7%. Results of test and practical application show that the feeding system is reliable and efficient, easy to operate, with which, timing, quantitative and high efficient feed can be realized.

Key words: pond aquaculture; feeding system; pneumatic conveying; automatic control

基金项目：现代农业产业技术体系建设专项资金资助项目（nycytx-49-12），农业部渔业装备与工程重点开放实验室开放基金资助
作者简介：王志勇（1979—），男，助理研究员，工学硕士，主要从事渔业装备研究。E-mail: wzy279@sina.com
 

(来源：《渔业现代化》2011.38(1)：46-49)